3/4" Horizontal Thermostatic Shower Valve & Trim - 3 Output
Model#: 100.2705RG - VIEW THE WHOLE COLLECTION
VIEW THE WHOLE COLLECTION
3/4" Horizontal Thermostatic Shower Valve & Trim - 3 Output
Model#: 100.2705RG - VIEW THE WHOLE COLLECTION
- Solid Brass Construction
- Includes Thermostatic Valve - TVH.2705F
- With Integral Service Stops
- Three Output Ports
- Extensions Available - TVH.4101E**
| FAST SHIP FINISH |
|
| SPECIAL FINISH |
|
Rock Grey (SPECIAL FINISH) - 8 Week Lead Time - List Price USD 1189.0
PRODUCT BREAKDOWN:
The TVH.2705F Thermostatic valve features 3/4″ NPT connections and has 3 water outputs [ports] which are operable one at a time without shared port operation. This product meets CAL-Green compliance criteria. The right handle sets the temperature. The left handle controls water diversion between the 3 water output ports. Each port has full volume control capability.
HORIZONTAL OR VERTICAL INSTALLATION – The TVH.2705F can be installed horizontally or vertically.
SUPPLY STOPS – There are two safety stops at each water inlet to prevent water flow in case of installation and repairs.
HANDLE OPERATION – The right handle is used to control the temperature of water flowing through the outlet ports. The left handle is used to divert the water between each output port and is= capable of controlling the volume of water from full flow to a trickle.
ANTI-SCALD RING – Over the temperature control knob, is an anti-scald temperature stop ring which is a safety feature in this thermostatic value. With the help of this ring, the temperature of the water is regulated. Covering this ring is the handle knob which has a push-button on the side. To adjust the water temperature, one needs to press this button and move the handle to a hot or cold direction. Without pressing it, the user will not be able to rotate the handle to the full HOT position – as an anti-scald prevention mechanism. The anti-scald temperature stop ring should be fitted tightly over the valve (tapping using a rubber mallet might be required) for it to function properly.
VALVE INSTALLATION -As the valve is installed, care should be taken to maintain a proper distance from the back of the valve to the finished tile which should be between 2.77″ and 3.44″ inches [Rough In Spec]. Also, the value must be installed straight and not at an angle or upside down. In case, the tile is thicker, or valve installed in the wall is too deep, extension kits are available and can be used for elongating both handles of the valve.
CUT OUT DIMENSIONS – The cut out in wall should be 7.89″ x 1.89″ Inches which is properly covered by the trim plate. This will ensure that the trim plate will cover the cut-out hole in the wall.
TRIMS – The trims comprise of a well-finished cover plate and handle knobs. The trim plate is used to cover the wall. Depending upon the shower model, trims can be of different shape and size, varying from square to circular shower handles.
CARTRIDGE – The TVH.2705F valve can be used with two cartridges. The default cartridge that the valve comes with is the Model # 15100 cartridge which is a 3 output non-shared [CAL-Green Compliant] cartridge. A shared port operation cartridge [Model # 15200] can also be used to activate 2 out of 3 ports at the same time.
HORIZONTAL OR VERTICAL INSTALLATION – The TVH.2705F can be installed horizontally or vertically.
SUPPLY STOPS – There are two safety stops at each water inlet to prevent water flow in case of installation and repairs.
HANDLE OPERATION – The right handle is used to control the temperature of water flowing through the outlet ports. The left handle is used to divert the water between each output port and is= capable of controlling the volume of water from full flow to a trickle.
ANTI-SCALD RING – Over the temperature control knob, is an anti-scald temperature stop ring which is a safety feature in this thermostatic value. With the help of this ring, the temperature of the water is regulated. Covering this ring is the handle knob which has a push-button on the side. To adjust the water temperature, one needs to press this button and move the handle to a hot or cold direction. Without pressing it, the user will not be able to rotate the handle to the full HOT position – as an anti-scald prevention mechanism. The anti-scald temperature stop ring should be fitted tightly over the valve (tapping using a rubber mallet might be required) for it to function properly.
VALVE INSTALLATION -As the valve is installed, care should be taken to maintain a proper distance from the back of the valve to the finished tile which should be between 2.77″ and 3.44″ inches [Rough In Spec]. Also, the value must be installed straight and not at an angle or upside down. In case, the tile is thicker, or valve installed in the wall is too deep, extension kits are available and can be used for elongating both handles of the valve.
CUT OUT DIMENSIONS – The cut out in wall should be 7.89″ x 1.89″ Inches which is properly covered by the trim plate. This will ensure that the trim plate will cover the cut-out hole in the wall.
TRIMS – The trims comprise of a well-finished cover plate and handle knobs. The trim plate is used to cover the wall. Depending upon the shower model, trims can be of different shape and size, varying from square to circular shower handles.
CARTRIDGE – The TVH.2705F valve can be used with two cartridges. The default cartridge that the valve comes with is the Model # 15100 cartridge which is a 3 output non-shared [CAL-Green Compliant] cartridge. A shared port operation cartridge [Model # 15200] can also be used to activate 2 out of 3 ports at the same time.
| Collection | Serie 100 |
| Item Category | Showering |
| Item Sub Category | Shower Faucets |
| Item Sub Sub Category | 3-Output Shower Faucet |
| Style | Contemporary / Modern |
| Warranty | Limited Lifetime Warranty. See Warranty page for complete details. |
Product Docs:
Spec Sheet
Installation VideoProduct Info:
| Connection Size | 3/4" Female |
| Integrated Volume Control | Yes |
| Valve Included | Yes |
| Valve Type | Thermostatic |
| Installation Type | Wall Mounted |
| Extensions Available | Yes |
| Material | Brass |
| Anti-Scald Ring | Included |
| Supply Stops | Included |
| Temperature Cartridge | TVH.4201-9853 |
| Diverter Cartridge Non-Shared | 15100 |
| Diverter Cartridge Shared | 15200 |
| Flow Rate | 8 GPM @ 60 PSI |
| Output Ports | 3 |
| Handle Style | Knob |
Available Finishes:
| Model# | Finish | List Price(USD) |
|---|---|---|
| 100.2705CP | Chrome | USD 1010.0 |
| 100.2705BN | Brushed Nickel PVD | USD 1044.0 |
| 100.2705MB | Matte Black | USD 1089.0 |
| 100.2705SB | Satin Brass PVD | USD 1067.0 |
| 100.2705BB | Brushed Bronze PVD | USD 1067.0 |
| 100.2705SG | Steel Grey | USD 1189.0 |
| 100.2705GMG | Gun Metal Grey | USD 1189.0 |
| 100.2705CR | Crimson | USD 1189.0 |
| 100.2705SKB | Sky Blue | USD 1189.0 |
| 100.2705BP | Blue Platinum | USD 1189.0 |
| 100.2705GB | Gloss Black | USD 1189.0 |
| 100.2705NB | Navy Blue | USD 1189.0 |
| 100.2705LG | Leaf Green | USD 1189.0 |
| 100.2705DG | Dark Grey | USD 1189.0 |
| 100.2705AG | Army Green | USD 1189.0 |
| 100.2705LV | Light Verde | USD 1189.0 |
| 100.2705DR | Deep Red | USD 1189.0 |
| 100.2705VB | Vortex Brown | USD 1189.0 |
| 100.2705IG | Isenberg Green | USD 1189.0 |
| 100.2705LT | Light Tan | USD 1189.0 |
| 100.2705RG | Rock Grey | USD 1189.0 |
| 100.2705DGR | Dark Green | USD 1189.0 |
| 100.2705DT | Dark Tan | USD 1189.0 |
