The TVH.4401 Thermostatic valve features 3/4" NPT connections and has 2 water outputs [ports] which are operable simultaneously, i.e. both at the same time, or one at a time. The middle handle sets the temperature. The top handle controls output port 1 and the bottom handle controls output port 2. Each port has full volume control capability and can be activated at the same time.

SUPPLY STOPS – There are two safety stops at each water inlet to prevent water flow in case of installation and repairs.

HANDLE OPERATION – The middle handle is used to control the temperature of water flowing through the outlet. The top handle controls the volume of water from full flow to a trickle for the output port 1. The bottom handle controls the volume of water from full flow to a trickle for the output port 2.

ANTI-SCALD RING – Over the temperature control knob, is an anti-scald temperature stop ring which is a safety feature in this thermostatic value. With the help of this ring, the temperature of the water is regulated. Covering this ring is the handle knob which has a push-button on the side. To adjust the water temperature, one needs to press this button and move the handle to a hot or cold direction. Without pressing it, the user will not be able to rotate the handle to the full hot position, as an anti-scald prevention mechanism. The anti-scald temperature stop ring should be fitted tightly over the valve (tapping using a rubber mallet might be required) for it to function properly.

VALVE INSTALLATION – As the valve is installed, care should be taken to maintain a proper distance from the back of the valve to the finished tile which should be between 2.77 and 3.44 inches [Rough In Spec]. Also, the value must be installed straight and not at an angle or upside down. In case, the tile is thicker, or valve installed in the wall is too deep, extension kits are available and can be used for elongating both handles of the valve.

CUT OUT DIMENSIONS – The cut out in wall should be 8.81 X 4.44 Inches which is properly covered by the trim plate. This will ensure that the trim plate will cover the cut-out hole in the wall.

TRIMS – The trims comprise of a well-finished cover plate and handle knobs. The trim plate is used to cover the wall. Depending upon the shower model, trims can be of different shape and size, varying from square to circular shower handles.

Collection	Serie 196
Item Category	Showering
Item Sub Category	Shower Faucets
Item Sub Sub Category	2-Output Shower Faucet
Style	Contemporary / Modern
Warranty	Limited Lifetime Warranty. See Warranty page for complete details.

Product Docs:

Spec Sheet

Parts Diagram

Installation Docs

Installation Video

Product Info:

Connection Size	3/4" Female
Integrated Volume Control	Yes
Valve Included	Yes
Valve Type	Thermostatic
Installation Type	Wall Mounted
Extensions Available	Yes
Material	Brass
Anti-Scald Ring	Included
Supply Stops	Included
Temperature Cartridge	TVH.4201-9853
Volume Control Cartridge	TVH.4511-9853
Flow Rate	13 GPM @ 60 PSI
Output Ports	2
Handle Style	Knob

Available Finishes:

Model#	Finish	List Price(USD)
196.4401CP	Chrome	USD 1080.0
196.4401BN	Brushed Nickel PVD	USD 1136.0
196.4401PN	Polished Nickel PVD	USD 1136.0
196.4401MB	Matte Black	USD 1215.0
196.4401SB	Satin Brass PVD	USD 1159.0
196.4401SG	Steel Grey	USD 1501.0
196.4401GMG	Gun Metal Grey	USD 1501.0
196.4401CR	Crimson	USD 1501.0
196.4401SKB	Sky Blue	USD 1501.0
196.4401BP	Blue Platinum	USD 1501.0
196.4401GB	Gloss Black	USD 1501.0
196.4401NB	Navy Blue	USD 1501.0
196.4401LG	Leaf Green	USD 1501.0
196.4401DG	Dark Grey	USD 1501.0
196.4401AG	Army Green	USD 1501.0
196.4401LV	Light Verde	USD 1501.0
196.4401DR	Deep Red	USD 1501.0
196.4401VB	Vortex Brown	USD 1501.0
196.4401IG	Isenberg Green	USD 1501.0
196.4401LT	Light Tan	USD 1501.0
196.4401RG	Rock Grey	USD 1501.0
196.4401DGR	Dark Green	USD 1501.0
196.4401DT	Dark Tan	USD 1501.0