This product is a 1/2” NPT connection valve and trim combo with two volume control handles separately for hot and cold water with single mixed output.

Handle Operation – The volume and temperature of the water are controlled by the two handles, HOT and COLD.

Valve Installation – As the valve [Part # WLM.1900] is installed, care should be taken to maintain a proper distance from the back of the valve to the surface of the finished tile which should be between 2.39” and 3.09”. Also, the valve must be installed horizontally and not at an angle. In case, a tile is thicker, or wall is deep, extensions are used for elongating both handles of the valve to ensure the proper setting of the trim. Extension kits can be ordered separately in Chrome, Brushed Nickel, or other special finishes.

Cut Out Dimensions – The cut out in wall should be 3 holes, 1.3 inches in diameter which will properly be covered by the trim plates. This will ensure that the trim plate will cover the cut out hole in the wall.

Trims – The trims comprise of well-finished handle knobs, handle trims, cartridge covers, and spout. Depending upon the shower model, trims can be of different shape and size, varying from square to circular shower handles.

Collection	Serie 250
Style	Contemporary / Modern
Warranty	Limited Lifetime Warranty. See Warranty page for complete details.

Product Docs:

Spec Sheet

Parts Diagram

Installation Docs

Product Info:

ADA Compliant	Yes
Material	Brass
Valve Included	Yes
Installation Type	Wall Mounted
Extensions Available	Yes
Connection Size	1/2" Female
Flow Rate	8.0 GPM @ 60 PSI
Drain Assembly	Not Included
Hot Side Cartridge	160.1900-18058
Cold Side Cartridge	160.1900-18057
Handle Style	Lever

Available Finishes:

Model#	Finish	List Price(USD)
250.2450CP	Chrome	USD 733.0
250.2450BN	Brushed Nickel PVD	USD 756.0
250.2450MB	Matte Black	USD 788.0